Find correct parts for your car.

Search by registration number

VIN number / Chasis number

OR

Select Car Make Model

Material	steel
Fitting position	Front
Length (mm)	101
Rod/strut	coupling rod
Svhc	no svhc present!

Product number: 818 0187 10

FAG Front Anti Roll Bar Stabiliser Link For Audi Seat Skoda Vw A3 Bora Golf G

In stock

Shipping method	Delivery time	Stock
Shipping	14-8-2025	3

Price excl. vat.

£ 15,72

Add to cart

Description

FAG Anti-Roll Bar Link (Stabiliser / Drop Link) – Sold Individually

Genuine FAG anti-roll bar link designed to restore precise roll control and reduce body lean. Built to OE specifications, it connects the stabiliser bar to the suspension strut/control arm for sharp, predictable handling.

What’s Included

Sold as a single link (one side only). For both sides of the axle, please order quantity 2.

Please check the product photos for the exact contents supplied with this item. If you’re unsure, contact us with your VIN/registration and we’ll confirm what’s included and the correct part for your vehicle.

Note: New nuts/bolts are supplied only if shown or stated for your specific part number.

Key Features

OE-matched length and joint angles for direct fit
High-strength ball studs with precision bearing surfaces
Sealed, maintenance-free joints and durable dust boots
Corrosion-resistant finish for long service life
Engineered by FAG (Schaeffler), trusted OE supplier

Check Before You Buy

Position/side: front or rear; left/right; some links are side-specific
Length & ends: straight vs. offset; stud thread size/pitch; nut type (nyloc/castle)
Attachment style: cone/taper seat vs. through-bolt; hex/Torx holding feature
Anti-roll bar diameter / suspension package (sports vs. standard where applicable)
Verify by VIN/registration and FAG/OE part numbers for guaranteed fit

When to Replace

Clunks or rattles over bumps; knocking on rough roads
Loose, vague turn-in or excessive body roll
Torn dust boots, rust contamination or play in the joints
MOT/inspection advisory or fail for link wear

Installation Summary

Support the suspension; remove wheel for access
Counter-hold the ball stud (hex/Torx) to prevent boot damage; remove nuts
Fit new link; torque fixings to OE specification (with suspension loaded at ride height)
Inspect the anti-roll bar bushes and opposite link; replace in axle pairs for best results

Good Practice

Use new self-locking nuts where specified
Do not twist the dust boot during tightening
After replacement, road-test and recheck torque

Warranty: FAG suspension components are covered by the manufacturer’s warranty when supplied via authorised distributors. Correct fitment is required for warranty validity.

Manufacturer	Productnumber
audi	1J0 411 315 C , 1J0411315C
audi	1J0 411 315 G , 1J0411315G
audi	1J0411315C
audi	1J0411315G
seat	1J0 411 315 C , 1J0411315C
seat	1J0 411 315 G , 1J0411315G
seat	1J0 411 315 J , 1J0411315J
seat	1J0411315C
seat	1J0411315G
seat	1J0411315J
skoda	1J0 411 315 C , 1J0411315C
skoda	1J0 411 315 G , 1J0411315G
skoda	1J0 411 315 J , 1J0411315J
skoda	1J0411315C
skoda	1J0411315G
skoda	1J0411315J
vw	1J0 411 315 C , 1J0411315C
vw	1J0 411 315 G , 1J0411315G
vw	1J0 411 315 J , 1J0411315J
vw	1J0411315C
vw	1J0411315G
vw	1J0411315J

Usage numbers
DELPHI TC2051
FEBI BILSTEIN 18266
FEBI BILSTEIN 30154
LEMFÖRDER 21699 01
LEMFÖRDER 21699 02
LEMFÖRDER 21699 03
LEMFÖRDER 2169901
LEMFÖRDER 2169902
LEMFÖRDER 2169903
METZGER 6-503M
METZGER 6503M
MEYLE 100 411 0007
MEYLE 1004110007
MONROE L29611
MOOG VO-LS-0475
MOOG VOLS0475
QUINTON HAZELL QLS3250S
RUVILLE 925400
SCHAEFFLER GRUPPE 818 0187 10
SCHAEFFLER GRUPPE 818018710
SIDEM 63461
SKF VKDS 341010
SKF VKDS341010
SWAG 30 76 0004
SWAG 30 93 0154
SWAG 30760004
SWAG 30930154
TRW JTS387

Manufacturer	Model	Version	Engine code	Construction type	Construction start	Construction end	Pk	Power kw
audi
seat
skoda
vw

FAQ

You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.

Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.

Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.

Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.

Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.

The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.