Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    Schaeffler FAG
    Fitting position Front
    Inner diameter (mm) 16
    Rod/strut coupling rod
    Svhc no svhc present!
    Product number: 818 0188 10

    FAG Front Anti Roll Bar Stabiliser Link For Seat Vw Arosa Lupo Polo Polo Van

    Price excl. vat.
    £ 13,30

    Description


    FAG Anti-Roll Bar Link (Stabiliser / Drop Link) – Sold Individually

    Genuine FAG anti-roll bar link designed to restore precise roll control and reduce body lean. Built to OE specifications, it connects the stabiliser bar to the suspension strut/control arm for sharp, predictable handling.

    What’s Included

    Sold as a single link (one side only). For both sides of the axle, please order quantity 2.

    Please check the product photos for the exact contents supplied with this item. If you’re unsure, contact us with your VIN/registration and we’ll confirm what’s included and the correct part for your vehicle.

    Note: New nuts/bolts are supplied only if shown or stated for your specific part number.

    Key Features

    • OE-matched length and joint angles for direct fit
    • High-strength ball studs with precision bearing surfaces
    • Sealed, maintenance-free joints and durable dust boots
    • Corrosion-resistant finish for long service life
    • Engineered by FAG (Schaeffler), trusted OE supplier

    Check Before You Buy

    • Position/side: front or rear; left/right; some links are side-specific
    • Length & ends: straight vs. offset; stud thread size/pitch; nut type (nyloc/castle)
    • Attachment style: cone/taper seat vs. through-bolt; hex/Torx holding feature
    • Anti-roll bar diameter / suspension package (sports vs. standard where applicable)
    • Verify by VIN/registration and FAG/OE part numbers for guaranteed fit

    When to Replace

    • Clunks or rattles over bumps; knocking on rough roads
    • Loose, vague turn-in or excessive body roll
    • Torn dust boots, rust contamination or play in the joints
    • MOT/inspection advisory or fail for link wear

    Installation Summary

    • Support the suspension; remove wheel for access
    • Counter-hold the ball stud (hex/Torx) to prevent boot damage; remove nuts
    • Fit new link; torque fixings to OE specification (with suspension loaded at ride height)
    • Inspect the anti-roll bar bushes and opposite link; replace in axle pairs for best results

    Good Practice

    • Use new self-locking nuts where specified
    • Do not twist the dust boot during tightening
    • After replacement, road-test and recheck torque

    Warranty: FAG suspension components are covered by the manufacturer’s warranty when supplied via authorised distributors. Correct fitment is required for warranty validity.

    Usage numbers
    APEC AST4080
    DELPHI TC2027
    FEBI BILSTEIN 25184
    LEMFÖRDER 31997 01
    LEMFÖRDER 3199701
    METZGER 6-514K
    METZGER 6514K
    MEYLE 100 411 0008/S
    MEYLE 1004110008S
    MONROE L29616
    MOOG VO-LS-0463
    MOOG VOLS0463
    NAPA NST4080
    QUINTON HAZELL QLS3060S
    RUVILLE 925401
    SCHAEFFLER GRUPPE 818 0188 10
    SCHAEFFLER GRUPPE 818018810
    SIDEM 63466
    SKF VKDS 341014
    SKF VKDS341014
    SWAG 30 79 0005
    SWAG 30790005
    TRW JTS397
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    seat seat
    vw vw

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.