Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    Schaeffler FAG
    Fitting position Front
    Length (mm) 300
    Thread size m10x1,25
    Rod/strut coupling rod
    Svhc no svhc present!
    Product number: 818 0408 10

    FAG Front Anti Roll Bar Stabiliser Link For Suzuki Grand Vitara Xl7

    Price excl. vat.
    £ 12,09

    Description


    FAG Anti-Roll Bar Link (Stabiliser / Drop Link) – Sold Individually

    Genuine FAG anti-roll bar link designed to restore precise roll control and reduce body lean. Built to OE specifications, it connects the stabiliser bar to the suspension strut/control arm for sharp, predictable handling.

    What’s Included

    Sold as a single link (one side only). For both sides of the axle, please order quantity 2.

    Please check the product photos for the exact contents supplied with this item. If you’re unsure, contact us with your VIN/registration and we’ll confirm what’s included and the correct part for your vehicle.

    Note: New nuts/bolts are supplied only if shown or stated for your specific part number.

    Key Features

    • OE-matched length and joint angles for direct fit
    • High-strength ball studs with precision bearing surfaces
    • Sealed, maintenance-free joints and durable dust boots
    • Corrosion-resistant finish for long service life
    • Engineered by FAG (Schaeffler), trusted OE supplier

    Check Before You Buy

    • Position/side: front or rear; left/right; some links are side-specific
    • Length & ends: straight vs. offset; stud thread size/pitch; nut type (nyloc/castle)
    • Attachment style: cone/taper seat vs. through-bolt; hex/Torx holding feature
    • Anti-roll bar diameter / suspension package (sports vs. standard where applicable)
    • Verify by VIN/registration and FAG/OE part numbers for guaranteed fit

    When to Replace

    • Clunks or rattles over bumps; knocking on rough roads
    • Loose, vague turn-in or excessive body roll
    • Torn dust boots, rust contamination or play in the joints
    • MOT/inspection advisory or fail for link wear

    Installation Summary

    • Support the suspension; remove wheel for access
    • Counter-hold the ball stud (hex/Torx) to prevent boot damage; remove nuts
    • Fit new link; torque fixings to OE specification (with suspension loaded at ride height)
    • Inspect the anti-roll bar bushes and opposite link; replace in axle pairs for best results

    Good Practice

    • Use new self-locking nuts where specified
    • Do not twist the dust boot during tightening
    • After replacement, road-test and recheck torque

    Warranty: FAG suspension components are covered by the manufacturer’s warranty when supplied via authorised distributors. Correct fitment is required for warranty validity.

    Manufacturer Productnumber
    suzuki 42420-65J00 , 4242065J00
    suzuki 4242065J00
    Usage numbers
    APEC AST4355
    DELPHI TC2612
    FEBI BILSTEIN 30186
    FIRST LINE FDL7055
    JAPANPARTS SI-803
    JAPANPARTS SI803
    LEMFÖRDER 38862 01
    LEMFÖRDER 3886201
    METZGER 53051818
    MEYLE 33-16 060 0005/HD
    MEYLE 33160600005HD
    MONROE L69602
    MOOG SZ-LS-7318
    MOOG SZLS7318
    NAPA NST4355
    RUVILLE 917737
    SCHAEFFLER GRUPPE 818 0408 10
    SCHAEFFLER GRUPPE 818040810
    SIDEM 77062
    TRW JTS7666
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    suzuki suzuki

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.