Find correct parts for your car.

Search by registration number

VIN number / Chasis number

OR

Select Car Make Model

Paired article number	818 0084 10
Fitting position	Front Left
Rod/strut	suspension rod
Svhc	no svhc present!

Product number: 818 0083 10

FAG Front Left Anti Roll Bar Stabiliser Link For Mercedes-Benz S-Class

Out of stock

Price incl. vat.

£ 12,09

Notify me when back in stock

Description

FAG Anti-Roll Bar Link (Stabiliser / Drop Link) – Sold Individually

Genuine FAG anti-roll bar link designed to restore precise roll control and reduce body lean. Built to OE specifications, it connects the stabiliser bar to the suspension strut/control arm for sharp, predictable handling.

What’s Included

Sold as a single link (one side only). For both sides of the axle, please order quantity 2.

Please check the product photos for the exact contents supplied with this item. If you’re unsure, contact us with your VIN/registration and we’ll confirm what’s included and the correct part for your vehicle.

Note: New nuts/bolts are supplied only if shown or stated for your specific part number.

Key Features

OE-matched length and joint angles for direct fit
High-strength ball studs with precision bearing surfaces
Sealed, maintenance-free joints and durable dust boots
Corrosion-resistant finish for long service life
Engineered by FAG (Schaeffler), trusted OE supplier

Check Before You Buy

Position/side: front or rear; left/right; some links are side-specific
Length & ends: straight vs. offset; stud thread size/pitch; nut type (nyloc/castle)
Attachment style: cone/taper seat vs. through-bolt; hex/Torx holding feature
Anti-roll bar diameter / suspension package (sports vs. standard where applicable)
Verify by VIN/registration and FAG/OE part numbers for guaranteed fit

When to Replace

Clunks or rattles over bumps; knocking on rough roads
Loose, vague turn-in or excessive body roll
Torn dust boots, rust contamination or play in the joints
MOT/inspection advisory or fail for link wear

Installation Summary

Support the suspension; remove wheel for access
Counter-hold the ball stud (hex/Torx) to prevent boot damage; remove nuts
Fit new link; torque fixings to OE specification (with suspension loaded at ride height)
Inspect the anti-roll bar bushes and opposite link; replace in axle pairs for best results

Good Practice

Use new self-locking nuts where specified
Do not twist the dust boot during tightening
After replacement, road-test and recheck torque

Warranty: FAG suspension components are covered by the manufacturer’s warranty when supplied via authorised distributors. Correct fitment is required for warranty validity.

Manufacturer	Productnumber
mercedes-benz	140 320 11 89 , 1403201189
mercedes-benz	1403201189
mercedes-benz	A 140 320 11 89 , A1403201189
mercedes-benz	A1403201189

Usage numbers
DELPHI TC484
FEBI BILSTEIN 08828
LEMFÖRDER 10738 01
LEMFÖRDER 1073801
LEMFÖRDER 38188 01
LEMFÖRDER 3818801
MEYLE 016 060 6318
MEYLE 0160606318
MONROE L23680
MOOG ME-DS-6318
MOOG MEDS6318
OPTIMAL EL1194
RUVILLE 915146
SCHAEFFLER GRUPPE 818 0083 10
SCHAEFFLER GRUPPE 818008310
SIDEM 49466
SWAG 10 79 0086
SWAG 10790086
TRW JTS133

Manufacturer	Model	Version	Engine code	Construction type	Construction start	Construction end	Pk	Power kw
mercedes-benz

FAQ

You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.

Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.

Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.

Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.

Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.

The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.

EAN code	4040074487358
Productnumber	016 060 6318/HD
Brand	MEYLE

EAN code	5902048904768
Productnumber	ZLP-ME-010
Brand	NTY

EAN code	5038206438384
Productnumber	LS9823
Brand	BGA

EAN code	4005108963239
Productnumber	712 1795 10
Brand	117

Monday	09:00 - 05:30
Tuesday	09:00 - 05:30
Wednesday	09:00 - 05:30
Thursday	09:00 - 05:30
Friday	09:00 - 05:30
Saturday	09:00 - 04:00
Sunday	10:00 - 04:00

£ 16,79

£ 13,19

£ 5,99

£ 14,39

Find correct parts for your car.

OR

Select Car Make Model

FAG Front Left Anti Roll Bar Stabiliser Link For Mercedes-Benz S-Class

Description

FAG Anti-Roll Bar Link (Stabiliser / Drop Link) – Sold Individually

What’s Included

Key Features

Check Before You Buy

When to Replace

Installation Summary

Good Practice

FAQ

Alternative products (4)

Last viewed

Find correct parts for your car.

OR

Select Car Make Model

FAG Front Left Anti Roll Bar Stabiliser Link For Mercedes-Benz S-Class

Description

FAG Anti-Roll Bar Link (Stabiliser / Drop Link) – Sold Individually

What’s Included

Key Features

Check Before You Buy

When to Replace

Installation Summary

Good Practice

FAQ

Alternative products (4)

MEYLE HD Front Left Antiroll Bar Stabiliser Drop Link For Mercedes-Benz S-Class

£ 16,79

MEYLE Front Left Antiroll Bar Stabiliser Drop Link For Mercedes-Benz S-Class

£ 13,19

NTY ZLP-ME-010 Antiroll Bar Stabiliser Drop Link

£ 5,99

BGA LS9823 Antiroll Bar Stabiliser Drop Link

£ 14,39

Last viewed

INA Bearing manual transmission - 712 1795 10

£ 39,92