Find correct parts for your car.

Search by registration number

VIN number / Chasis number

OR

Select Car Make Model

Paired article number	818 0026 10
Fitting position	front right,rear left
Rod/strut	coupling rod
Svhc	no svhc present!

Product number: 818 0027 10

FAG Front Right Rear Left Anti Roll Bar Stabiliser Link For Ford Usa Kia Mazd

In stock

Shipping method	Delivery time	Stock
Shipping	15-8-2025	3

Price excl. vat.

£ 10,88

Add to cart

Description

FAG Anti-Roll Bar Link (Stabiliser / Drop Link) – Sold Individually

Genuine FAG anti-roll bar link designed to restore precise roll control and reduce body lean. Built to OE specifications, it connects the stabiliser bar to the suspension strut/control arm for sharp, predictable handling.

What’s Included

Sold as a single link (one side only). For both sides of the axle, please order quantity 2.

Please check the product photos for the exact contents supplied with this item. If you’re unsure, contact us with your VIN/registration and we’ll confirm what’s included and the correct part for your vehicle.

Note: New nuts/bolts are supplied only if shown or stated for your specific part number.

Key Features

OE-matched length and joint angles for direct fit
High-strength ball studs with precision bearing surfaces
Sealed, maintenance-free joints and durable dust boots
Corrosion-resistant finish for long service life
Engineered by FAG (Schaeffler), trusted OE supplier

Check Before You Buy

Position/side: front or rear; left/right; some links are side-specific
Length & ends: straight vs. offset; stud thread size/pitch; nut type (nyloc/castle)
Attachment style: cone/taper seat vs. through-bolt; hex/Torx holding feature
Anti-roll bar diameter / suspension package (sports vs. standard where applicable)
Verify by VIN/registration and FAG/OE part numbers for guaranteed fit

When to Replace

Clunks or rattles over bumps; knocking on rough roads
Loose, vague turn-in or excessive body roll
Torn dust boots, rust contamination or play in the joints
MOT/inspection advisory or fail for link wear

Installation Summary

Support the suspension; remove wheel for access
Counter-hold the ball stud (hex/Torx) to prevent boot damage; remove nuts
Fit new link; torque fixings to OE specification (with suspension loaded at ride height)
Inspect the anti-roll bar bushes and opposite link; replace in axle pairs for best results

Good Practice

Use new self-locking nuts where specified
Do not twist the dust boot during tightening
After replacement, road-test and recheck torque

Warranty: FAG suspension components are covered by the manufacturer’s warranty when supplied via authorised distributors. Correct fitment is required for warranty validity.

Manufacturer	Productnumber
ford	3410591
ford	GA2A 3415 0A , GA2A34150A
ford	GA2A34150A
ford usa	GA2A 3415 0A , GA2A34150A
ford usa	GA2A34150A
kia	KGA2A-34-150A , KGA2A34150A
kia	KGA2A34150A
mazda	F151-34-150 , F15134150
mazda	F15134150
mazda	F189-34-150 , F18934150
mazda	F18934150
mazda	GA2A-34-150 , GA2A34150
mazda	GA2A-34-150A , GA2A34150A
mazda	GA2A34150
mazda	GA2A34150A
mazda	GD1E-34-150 , GD1E34150
mazda	GD1E34150
mazda	L206-34-150B , L20634150B
mazda	L20634150B

Usage numbers
BLUE PRINT ADM58502
DELPHI TC1105
FEBI BILSTEIN 23712
LEMFÖRDER 24938 01
LEMFÖRDER 2493801
METZGER MA-502
METZGER MA502
MEYLE 35-16 060 0002
MEYLE 35160600002
MONROE L50603
MOOG KI-LS-2676
MOOG KILS2676
MOOG MD-LS-1127
MOOG MD-LS-2694
MOOG MDLS1127
MOOG MDLS2694
NAPA NST4267
OPTIMAL G7-628
OPTIMAL G7628
QUINTON HAZELL QLS1626S
RUVILLE 917031
SCHAEFFLER GRUPPE 818 0027 10
SCHAEFFLER GRUPPE 818002710
SIDEM 51061
SWAG 83 92 3712
SWAG 83923712
TRW JTS193

Manufacturer	Model	Version	Engine code	Construction type	Construction start	Construction end	Pk	Power kw
ford usa
kia
mazda

FAQ

You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.

Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.

Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.

Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.

Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.

The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.