Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    Schaeffler INA
    Outer diameter (mm) 64
    Width (mm) 26
    Svhc no svhc present!
    Product number: 534 0331 10

    Ina Belt Tensioner V-ribbed Belt For Alpina Bmw 1 3 D3

    Price excl. vat.
    £ 30,24

    Description


    INA Belt Drive Components

    V‑Ribbed Belt Tensioner

    For the front‑end auxiliary drive (FEAD). Maintains constant belt tension for quiet, efficient power to the alternator, A/C compressor and other accessories.

    OE‑grade quality Low noise Long service life
    INA V‑ribbed belt tensioner main view
    INA V‑ribbed belt tensioner side view INA V‑ribbed belt tensioner 360 angle view INA V‑ribbed belt tensioner additional view

    When to Change

    • Noise: chirping/squeal at start‑up or with A/C load.
    • Visual wear: cracked or glazed belt, frayed ribs, rubber dust.
    • Arm movement: tensioner arm flutters or sits off‑center.
    • Bearing condition: pulley feels rough or has play when spun by hand (engine off).
    • Contamination: oil/coolant on belt or pulley surfaces.
    Service tip: Replace the tensioner whenever fitting a new FEAD/serpentine belt to avoid repeat labour and early failures.

    How to Fit (Universal Guide)

    1. Preparation. Park safely, engine cold. Photograph the belt routing. Tools: serpentine belt tool/long ratchet, socket set, torque wrench.
    2. Release tension & remove belt. Rotate the tensioner using its square hole or hex boss; slip the belt off a smooth pulley and release slowly. Remove the belt fully.
    3. Remove old tensioner. Unbolt the unit. Keep any spacers/dowels. Spin other pulleys to check for noise or play.
    4. Install new INA tensioner. Position, hand‑start bolts, then torque to the vehicle manufacturer’s spec. The pulley must spin freely and clear nearby parts.
    5. Refit belt. Route per your photo/diagram, leave the easiest pulley for last. Pre‑load the tensioner, seat the belt on all ribs, release slowly.
    6. Final checks. Turn the crankshaft by hand two full turns; re‑check tracking and alignment. Start engine; observe the tensioner arm and listen for noise.

    Always follow the vehicle manufacturer’s procedures, torque values and safety guidance.

    Manufacturer Productnumber
    bmw 11 28 7 790 447 , 11287790447
    bmw 11287790447
    bmw 7 790 447 , 7790447
    bmw 7790447
    mini 11 28 7 790 447 , 11287790447
    mini 11287790447
    mini 7 790 447 , 7790447
    mini 7790447
    Usage numbers
    AUTEX 654631
    BREDA LORETT CR 3681
    BREDA LORETT CR3681
    BREDA LORETT TOA3681
    DAYCO APV2774
    FEBI BILSTEIN 32248
    GATES 7808-21416
    GATES 780821416
    GATES T39016
    GMB GAT21790
    IPD 15-3626
    IPD 153626
    RUVILLE 55064
    SCHAEFFLER GRUPPE 534 0331 10
    SCHAEFFLER GRUPPE 534033110
    Schaeffler INA F-237819.03
    Schaeffler INA F-565887
    Schaeffler INA F23781903
    Schaeffler INA F565887
    SKF VKM 38212
    SKF VKM38212
    SWAG 20 93 2248
    SWAG 20932248
    TRIPLE FIVE GA350.65
    TRIPLE FIVE GA35065
    TRUCKTEC AUTOMOTIVE 08.19.253
    TRUCKTEC AUTOMOTIVE 08.19.254
    TRUCKTEC AUTOMOTIVE 0819253
    TRUCKTEC AUTOMOTIVE 0819254
    VAICO V20-4130
    VAICO V204130
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    alpina alpina
    bmw bmw

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.