Find correct parts for your car.

Search by registration number

VIN number / Chasis number

OR

Select Car Make Model

Search by company, model and type.

Outer diameter (mm)	60
Width (mm)	25
Svhc	no svhc present!

Product number: 534 0100 20

Ina Belt Tensioner V-ribbed Belt For Citroën Fiat Lancia Peugeot Suzuki 206 206

In stock

Shipping method	Delivery time	Stock
Shipping	11-9-2025	3

Price excl. vat.

£ 41,13

Add to cart

Description

INA Belt Drive Components

V‑Ribbed Belt Tensioner

For the front‑end auxiliary drive (FEAD). Maintains constant belt tension for quiet, efficient power to the alternator, A/C compressor and other accessories.

OE‑grade quality Low noise Long service life

INA V‑ribbed belt tensioner 360 angle view

INA V‑ribbed belt tensioner additional view

When to Change

Noise: chirping/squeal at start‑up or with A/C load.
Visual wear: cracked or glazed belt, frayed ribs, rubber dust.
Arm movement: tensioner arm flutters or sits off‑center.
Bearing condition: pulley feels rough or has play when spun by hand (engine off).
Contamination: oil/coolant on belt or pulley surfaces.

Service tip: Replace the tensioner whenever fitting a new FEAD/serpentine belt to avoid repeat labour and early failures.

How to Fit (Universal Guide)

Preparation. Park safely, engine cold. Photograph the belt routing. Tools: serpentine belt tool/long ratchet, socket set, torque wrench.
Release tension & remove belt. Rotate the tensioner using its square hole or hex boss; slip the belt off a smooth pulley and release slowly. Remove the belt fully.
Remove old tensioner. Unbolt the unit. Keep any spacers/dowels. Spin other pulleys to check for noise or play.
Install new INA tensioner. Position, hand‑start bolts, then torque to the vehicle manufacturer’s spec. The pulley must spin freely and clear nearby parts.
Refit belt. Route per your photo/diagram, leave the easiest pulley for last. Pre‑load the tensioner, seat the belt on all ribs, release slowly.
Final checks. Turn the crankshaft by hand two full turns; re‑check tracking and alignment. Start engine; observe the tensioner arm and listen for noise.

Always follow the vehicle manufacturer’s procedures, torque values and safety guidance.

Manufacturer	Productnumber
citroËn	00 005 751 30 , 0000575130
citroËn	0000575130
citroËn	5751.30 , 575130
citroËn	575130
citroËn	96 230 012 , 96230012
citroËn	96230012
fiat	9623001280
fiat	9633382780
peugeot	00 005 751 30 , 0000575130
peugeot	0000575130
peugeot	5751.30 , 575130
peugeot	575130
peugeot	96 230 012 , 96230012
peugeot	96230012
suzuki	49170-66G00 , 4917066G00
suzuki	4917066G00

Usage numbers
AJUSA 5751.30
AJUSA 575130
AJUSA 96230012
CONTINENTAL CTAM V85554
DAYCO APV2295
FAI AutoParts T9605
FEBI BILSTEIN 09791
FEBI BILSTEIN 9791
GATES 7808-21135
GATES 780821135
GATES T38235
GMB GAT21310
HK A152
HUTCHINSON T1006
HUTCHINSON T1008
IPD 10-0152
IPD 100152
MAPCO 23468
QUINTON HAZELL QTA1021
RUVILLE 55925
SCHAEFFLER GRUPPE 534 0100 20
SCHAEFFLER GRUPPE 534010020
Schaeffler INA F-123787
Schaeffler INA F-565935
Schaeffler INA F-565935.01
Schaeffler INA F123787
Schaeffler INA F565935
Schaeffler INA F56593501
SKF VKM 33029
SKF VKM33029
SNR GA358.55
SNR GA35855
SPIDAN 0.066925
SPIDAN 0066925
SWAG 99030056
TOPRAN 722 407
TOPRAN 722407
TRIPLE FIVE 0211-04-05925P
TRIPLE FIVE 02110405925P
TRIPLE FIVE 340 4957
TRIPLE FIVE 3404957
TRIPLE FIVE 3627
TRIPLE FIVE MBI-26380
TRIPLE FIVE MBI-26640
TRIPLE FIVE MBI26380
TRIPLE FIVE MBI26640
TRIPLE FIVE PBT8661
TRIPLE FIVE RKT1640
TRIPLE FIVE TP22482
TRIPLE FIVE Y1214
VAICO V24-0290
VAICO V240290

Manufacturer	Model	Version	Engine code	Construction type	Construction start	Construction end	Pk	Power kw
citroËn
fiat
lancia
peugeot
suzuki

FAQ

You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.

Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.

Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.

Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.

Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.

The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.