Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    Schaeffler INA
    Outer diameter (mm) 65
    Width (mm) 30
    Svhc no svhc present!
    Product number: 534 0590 10

    Ina Belt Tensioner V-ribbed Belt For Dacia Iran Khodro Mercedes-benz Nissan Rena

    Price excl. vat.
    £ 37,50

    Description


    INA Belt Drive Components

    V‑Ribbed Belt Tensioner

    For the front‑end auxiliary drive (FEAD). Maintains constant belt tension for quiet, efficient power to the alternator, A/C compressor and other accessories.

    OE‑grade quality Low noise Long service life
    INA V‑ribbed belt tensioner main view
    INA V‑ribbed belt tensioner side view INA V‑ribbed belt tensioner 360 angle view INA V‑ribbed belt tensioner additional view

    When to Change

    • Noise: chirping/squeal at start‑up or with A/C load.
    • Visual wear: cracked or glazed belt, frayed ribs, rubber dust.
    • Arm movement: tensioner arm flutters or sits off‑center.
    • Bearing condition: pulley feels rough or has play when spun by hand (engine off).
    • Contamination: oil/coolant on belt or pulley surfaces.
    Service tip: Replace the tensioner whenever fitting a new FEAD/serpentine belt to avoid repeat labour and early failures.

    How to Fit (Universal Guide)

    1. Preparation. Park safely, engine cold. Photograph the belt routing. Tools: serpentine belt tool/long ratchet, socket set, torque wrench.
    2. Release tension & remove belt. Rotate the tensioner using its square hole or hex boss; slip the belt off a smooth pulley and release slowly. Remove the belt fully.
    3. Remove old tensioner. Unbolt the unit. Keep any spacers/dowels. Spin other pulleys to check for noise or play.
    4. Install new INA tensioner. Position, hand‑start bolts, then torque to the vehicle manufacturer’s spec. The pulley must spin freely and clear nearby parts.
    5. Refit belt. Route per your photo/diagram, leave the easiest pulley for last. Pre‑load the tensioner, seat the belt on all ribs, release slowly.
    6. Final checks. Turn the crankshaft by hand two full turns; re‑check tracking and alignment. Start engine; observe the tensioner arm and listen for noise.

    Always follow the vehicle manufacturer’s procedures, torque values and safety guidance.

    Manufacturer Productnumber
    dacia 11 75 061 93R , 117506193R
    dacia 117506193R
    nissan 11750-6193R , 117506193R
    nissan 117506193R
    renault 11 75 061 93R , 117506193R
    renault 117506193R
    Usage numbers
    CONTINENTAL CTAM V85741
    FEBI BILSTEIN 100294
    GATES 7808-21767
    GATES 780821767
    GATES T39367
    IPD 15-4175
    IPD 154175
    OPTIMAL 0-N2308
    OPTIMAL 0-N2308S
    OPTIMAL 0N2308
    OPTIMAL 0N2308S
    QUINTON HAZELL QTA1635
    RUVILLE 55642
    SCHAEFFLER GRUPPE 534 0590 10
    SCHAEFFLER GRUPPE 534059010
    SKF VKM 36138
    SKF VKM36138
    SWAG 60 10 0294
    SWAG 60100294
    TRIPLE FIVE 03.82041
    TRIPLE FIVE 0382041
    TRIPLE FIVE 535605-E
    TRIPLE FIVE 535605E
    TRIPLE FIVE RKT3757
    TRISCAN 8641 253012
    TRISCAN 8641253012
    VAICO V46-1133
    VAICO V461133
    WILMINK GROUP WG1700425
    WILMINK GROUP WG1710196
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    dacia dacia
    mercedes-benz mercedes-benz
    nissan nissan
    renault renault

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.