Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    Schaeffler INA
    Outer diameter (mm) 76.5
    Width (mm) 22
    Svhc no svhc present!
    Product number: 534 0412 10

    Ina Belt Tensioner V-ribbed Belt For Ford Galaxy Mondeo S-max

    Price excl. vat.
    £ 38,71

    Description


    INA Belt Drive Components

    V‑Ribbed Belt Tensioner

    For the front‑end auxiliary drive (FEAD). Maintains constant belt tension for quiet, efficient power to the alternator, A/C compressor and other accessories.

    OE‑grade quality Low noise Long service life
    INA V‑ribbed belt tensioner main view
    INA V‑ribbed belt tensioner side view INA V‑ribbed belt tensioner 360 angle view INA V‑ribbed belt tensioner additional view

    When to Change

    • Noise: chirping/squeal at start‑up or with A/C load.
    • Visual wear: cracked or glazed belt, frayed ribs, rubber dust.
    • Arm movement: tensioner arm flutters or sits off‑center.
    • Bearing condition: pulley feels rough or has play when spun by hand (engine off).
    • Contamination: oil/coolant on belt or pulley surfaces.
    Service tip: Replace the tensioner whenever fitting a new FEAD/serpentine belt to avoid repeat labour and early failures.

    How to Fit (Universal Guide)

    1. Preparation. Park safely, engine cold. Photograph the belt routing. Tools: serpentine belt tool/long ratchet, socket set, torque wrench.
    2. Release tension & remove belt. Rotate the tensioner using its square hole or hex boss; slip the belt off a smooth pulley and release slowly. Remove the belt fully.
    3. Remove old tensioner. Unbolt the unit. Keep any spacers/dowels. Spin other pulleys to check for noise or play.
    4. Install new INA tensioner. Position, hand‑start bolts, then torque to the vehicle manufacturer’s spec. The pulley must spin freely and clear nearby parts.
    5. Refit belt. Route per your photo/diagram, leave the easiest pulley for last. Pre‑load the tensioner, seat the belt on all ribs, release slowly.
    6. Final checks. Turn the crankshaft by hand two full turns; re‑check tracking and alignment. Start engine; observe the tensioner arm and listen for noise.

    Always follow the vehicle manufacturer’s procedures, torque values and safety guidance.

    Manufacturer Productnumber
    ford 1376316
    ford 1387199
    ford 1425510
    ford 1567809
    ford 6G9Q-6A228-BC , 6G9Q6A228BC
    ford 6G9Q6A228BC
    ford 8G9Q-6A228-AA , 8G9Q6A228AA
    ford 8G9Q6A228AA
    Usage numbers
    AUTEX 654622
    BREDA LORETT TOA4005
    DAYCO APV2479
    FEBI BILSTEIN 33947
    GATES 7808-21541
    GATES 780821541
    GATES T39141
    HEPU 15-3617
    HEPU 153617
    IPD 15-3617
    IPD 153617
    OPTIMAL 0-N1797
    OPTIMAL 0N1797
    RUVILLE 541723
    RUVILLE 55262
    SCHAEFFLER GRUPPE 534 0412 10
    SCHAEFFLER GRUPPE 534041210
    SKF VKM34200
    SNR GA35267
    SWAG 50 93 3947
    SWAG 50933947
    TRIPLE FIVE 03.81024
    TRIPLE FIVE 0381024
    TRIPLE FIVE 950037
    TRISCAN 8641 163019
    TRISCAN 8641163019
    WILMINK GROUP WG1253540
    WILMINK GROUP WG1430395
    WILMINK GROUP WG1440328
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    ford ford

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.


    Last viewed