Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    MEYLE
    Supplementary article/info 2 with seal ring
    Number of pins (-pin connector) 3
    Sensor type hall sensor
    Product number: 114 810 0028

    Meyle Crankshaft Pulse Position Sensor For Audi Porsche Vw A4 A4 Allroad A5 A6 A6 Allroad

    Delivery 2-3 Working Days
    Price excl. vat.
    £ 15,59

    Description


    MEYLE ORIGINAL · ENGINE SENSORS

    Crankshaft Pulse Position Sensor

    Precision Hall/inductive sensing of crankshaft speed and position for exact ignition and injection timing. OE‑spec connector, housing and harness length for a direct, reliable fit.

    OE‑spec accuracy Robust sealing Plug‑and‑play
    24
    2‑Year Warranty
    MEYLE ORIGINAL (authorised supply)
    MEYLE crankshaft pulse position sensor — main image
    MEYLE crank sensor — connector detail MEYLE crank sensor — mounting detail

    Key Features

    • Accurate signal: Stable waveform for precise ignition and fuel timing across temperature ranges.
    • Durable build: Oil‑, heat‑ and vibration‑resistant housing; secure strain‑relief on harness.
    • OE connectivity: Correct connector geometry and pinout; firm locking tab engagement.
    • Quality tested: End‑of‑line electrical and functional verification.

    When to Replace

    • Hard starting / no‑start when hot, random stalling, or extended cranking.
    • Erratic rev counter, misfires, poor acceleration, or limp‑home.
    • Stored faults such as P0335–P0339 (crankshaft position sensor circuit).
    • Physical damage to sensor body, cable, connector or visible corrosion.

    How to Fit (Universal Guide)

    1. Preparation: Park safely; engine cool. Disconnect battery. Locate sensor (usually near crank pulley, bell housing, or block).
    2. Remove old sensor: Unplug connector; release harness clip(s). Remove mounting bolt(s) and extract sensor carefully.
    3. Inspect seat & tone wheel: Clean mounting bore; check for debris or damage on the reluctor/tone ring.
    4. Install MEYLE sensor: Lightly oil O‑ring if fitted. Seat fully; torque bolt(s) to spec. Route harness like OE—away from heat/moving parts.
    5. Reconnect & test: Plug in connector until it clicks. Clear DTCs, start engine, and confirm stable idle and RPM signal.

    Always follow the vehicle manufacturer’s procedures and torque settings. Use diagnostic data (RPM, cam/crank sync) to verify repair.

    Warranty applies to MEYLE ORIGINAL parts purchased via authorised supply channels. Your statutory rights remain unaffected.

    Usage numbers
    MPS0112
    BREMI 60500
    DELPHI SS12216-11B1
    DELPHI SS12216-12B1
    FACET 9.0783
    FEBI BILSTEIN 193643
    HELLA 6PU 009 168-811
    INTERMOTOR 17477
    MEAT & DORIA 871067
    NRF 755180
    OPTIMAL 07-S243
    SIDAT 83.3383A2
    SNR CKP154.13
    SWAG 33 11 1325
    TOPRAN 117 176
    TRISCAN 8855 29161
    VALEO 366746
    VEMO V10-72-0131
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    audi audi
    porsche porsche
    vw vw

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.