Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    MEYLE
    Supplementary article/info 2
    • with seal ring
    • with protection hose
    Number of pins (-pin connector) 3
    Sensor type inductive sensor
    Cable length (mm) 711
    Product number: 114 899 0005

    Meyle Crankshaft Pulse Position Sensor For Audi Seat Skoda Vw A4 A6 A8 Allroad Bora Exeo

    Delivery 2-3 Working Days

    Out of stock

    Price incl. vat.
    £ 15,59

    Description


    MEYLE ORIGINAL · ENGINE SENSORS

    Crankshaft Pulse Position Sensor

    Precision Hall/inductive sensing of crankshaft speed and position for exact ignition and injection timing. OE‑spec connector, housing and harness length for a direct, reliable fit.

    OE‑spec accuracy Robust sealing Plug‑and‑play
    24
    2‑Year Warranty
    MEYLE ORIGINAL (authorised supply)
    MEYLE crankshaft pulse position sensor — main image
    MEYLE crank sensor — connector detail MEYLE crank sensor — mounting detail

    Key Features

    • Accurate signal: Stable waveform for precise ignition and fuel timing across temperature ranges.
    • Durable build: Oil‑, heat‑ and vibration‑resistant housing; secure strain‑relief on harness.
    • OE connectivity: Correct connector geometry and pinout; firm locking tab engagement.
    • Quality tested: End‑of‑line electrical and functional verification.

    When to Replace

    • Hard starting / no‑start when hot, random stalling, or extended cranking.
    • Erratic rev counter, misfires, poor acceleration, or limp‑home.
    • Stored faults such as P0335–P0339 (crankshaft position sensor circuit).
    • Physical damage to sensor body, cable, connector or visible corrosion.

    How to Fit (Universal Guide)

    1. Preparation: Park safely; engine cool. Disconnect battery. Locate sensor (usually near crank pulley, bell housing, or block).
    2. Remove old sensor: Unplug connector; release harness clip(s). Remove mounting bolt(s) and extract sensor carefully.
    3. Inspect seat & tone wheel: Clean mounting bore; check for debris or damage on the reluctor/tone ring.
    4. Install MEYLE sensor: Lightly oil O‑ring if fitted. Seat fully; torque bolt(s) to spec. Route harness like OE—away from heat/moving parts.
    5. Reconnect & test: Plug in connector until it clicks. Clear DTCs, start engine, and confirm stable idle and RPM signal.

    Always follow the vehicle manufacturer’s procedures and torque settings. Use diagnostic data (RPM, cam/crank sync) to verify repair.

    Warranty applies to MEYLE ORIGINAL parts purchased via authorised supply channels. Your statutory rights remain unaffected.

    Usage numbers
    MPS0015
    AIC 51609
    BOSCH 0 261 210 177
    BOSCH 0 281 002 222
    BREMI 60191
    CALORSTAT by Vernet CS0359
    DELPHI SS10930
    FACET 9.0267
    FAE 79059
    FEBI BILSTEIN 24446
    HELLA 6PU 009 146-391
    HERTH+BUSS ELPARTS 70610068
    INTERMOTOR 18884
    INTERMOTOR 18922
    JP GROUP 1193701400
    MAGNETI MARELLI 064848017010
    MAGNETI MARELLI 064848049010
    MEAT & DORIA 87183
    MEAT & DORIA 87301
    METZGER 0902023
    METZGER 0902090
    MTE-THOMSON 70531
    NGK 81185
    NRF 755012
    NTK 81185
    OPTIMAL 07-S046
    SIDAT 83.148
    SIDAT 83.322
    SNR CKP154.18
    SWAG 32 92 4446
    TOPRAN 111 379
    TRISCAN 8855 29103
    VALEO 254026
    VEMO V10-72-0967
    WALKER PRODUCTS 235-1108
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    audi audi
    seat seat
    skoda skoda
    vw vw

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.