MEYLE Ball Joint – Suspension Pivot Joint

A MEYLE ball joint connects your vehicle’s control arm to the steering knuckle, allowing precise pivoting as the suspension moves. Over time, these joints wear out, causing noise, loose steering, uneven tyre wear, and poor handling. MEYLE offers both Standard and HD (Heavy Duty) versions for maximum durability and driving comfort.

Standard vs MEYLE /HD Ball Joints

• MEYLE Standard ball joints match original manufacturer specifications for OE-quality fit and performance.
• MEYLE /HD (Heavy Duty) ball joints are reinforced with upgraded materials, larger housings, and longer service life. Ideal for rough roads, heavier loads, or demanding use.

Note: MEYLE HD ball joints are clearly marked with /HD in the part number. If there is no /HD, it is the Standard version.

What’s Included

You will receive: 1x MEYLE Ball Joint (Standard or HD – see title/part number).
Please refer to the product image for exact kit contents. Some variants include nuts, bolts, or grease fittings depending on vehicle application.

When and Why to Replace a Ball Joint

Ball joints wear over time due to road impacts, turning stress, and contamination. Warning signs include clunking noises, wandering steering, uneven tyre wear, or poor alignment. Left ignored, a worn ball joint can eventually separate — a serious safety risk. MEYLE replacements restore precise steering and safe suspension movement.

How to Fit a Ball Joint – Step by Step

1. Secure the vehicle on level ground with axle stands and remove the wheel.
2. Unbolt and remove the lower control arm from the hub or knuckle (if required).
3. Use a ball joint separator tool or press to remove the worn joint from the arm or knuckle.
4. Clean the mounting area thoroughly – remove rust and debris for a flush fit.
5. Install the new MEYLE ball joint using the correct orientation and any supplied hardware.
6. Torque all bolts and fasteners to the manufacturer's specifications.
7. Refit control arm and other suspension components as removed.
8. Reinstall the wheel, lower the vehicle, and tighten wheel nuts.
9. After fitting, get a full wheel alignment to restore correct geometry and tyre wear.

Professional fitting is recommended. Always inspect both sides – if one ball joint has failed, the other may be close behind.

Why Choose MEYLE Ball Joints?

MEYLE is a premium automotive parts brand known for superior suspension and steering components. Their /HD range is built with reinforced housings and improved wear resistance, backed by extended warranty and tested for real-world durability.

Buy With Confidence – Authorised MEYLE Seller

We are an authorised MEYLE distributor. You’ll receive 100% genuine MEYLE products in official packaging, with fast dispatch and full warranty support.